Dell Latitude CPi R Series, Руководство по обслуживанию

Страница: 14 / 45

Dell Latitude CPt C-Series/CPi R-Series Service Manual 5
=,)&RQQHFWRUV
Some of the computer’s interface connectors are zero insertion force (ZIF)
connectors. These connectors are not removable, but they must be released
to disconnect a cable from them (see Figure 4).
)LJXUH 'LVFRQQHFWLQJ DQ ,QWHUIDFH &DEOH
&$87,21 7KH =,) FRQQHFWRUV DUH IUDJLOH 7R DYRLG GDPDJH GR QRW
DSSO\ WRR PXFK SUHVVXUH WR WKH PRYDEOH SDUW RI WKH FRQQHFWRU
To disconnect an interface cable from a ZIF connector, perform the following
steps:
1. Insert a small flat-blade screwdriver under the movable part of the
connector.
2. Pull gently upward on the movable part of the connector until it releases
the interface cable.
3. Grasp the interface cable and pull it out of the connector.
To reconnect an interface cable to a ZIF connector, perform the following
steps:
1. Use a small flat-blade screwdriver to open the movable part of the ZIF
connector.
2. Orient the end of the interface cable with the ZIF connector, and insert the
end of the cable into the connector.
3. While holding the cable in place, close the ZIF connector.
To ensure a firm connection, make sure the ZIF connector is completely
closed.
movable part of
connector
(do not remove)