Dell Latitude CPi A, Руководство по обслуживанию

Страница: 34 / 51

Dell Latitude CPi A Service Manual 27
6. Disconnect the display-assembly interface cable from the ZIF connector on
the inverter that is located on the right side of the LCD panel.
To disconnect the cable, carefully work the cable connector free from the ZIF
connector on the LCD panel. Do
not
pull on the LCD interface cable itself.
NOTES: When you replace the 13.3-inch LCD display, always replace the display
assembly bezel with the new one that comes with the LCD display.
If you need to replace the bottom LCD cable on the 13.3-inch display, use one
bend to route the new cable to the inverter board connector.
If you need to replace the bottom LCD cable on the 12.1-inch display, use two
bends to route the new cable to the inverter board connector.
2 %.&9"5 . 59$&
interface
connector
LCD B cable
(stays with LCD panel)
LCD A cable
inverter
connector
center-junction
connector
connector
tape