Dell Latitude CPi A, Руководство по обслуживанию

Страница: 23 / 51

16 Dell Latitude CPi A Service Manual
To remove the keyboard assembly, perform the following steps.
#$ $
1. Close the display assembly, and turn the computer upside down on a flat
work surface (see Figure 9).
2 3!
2. Remove the six 12-mm screws securing the keyboard to the computer.
3. Turn the computer right-side up and open the display.
$ $ % %
( .
$
4. Release the keyboard from the palmrest assembly:
a. Carefully deflect the palmrest (next to the blank key below the <Shift>
key; see Figure 10) away from the center of the keyboard, until the tab on
the palmrest’s inner edge disengages from the keyboard. The keyboard
should raise up slightly.
b. Insert a fingernail or a small flat-bladed screwdriver under the scalloped
edge of the blank key (see Figure 10), and lift the right edge of the
keyboard.
12-mm screws (6)