Dell Latitude 9330, Руководство по обслуживанию

Страница: 64 / 79

Table 11. System setup options—Security menu (continued)
Security
Start Data Wipe When enabled, the BIOS will queue up a data wipe cycle for storage device(s)
connected to the motherboard on the next reboot.
Default: OFF
Absolute
Absolute Enables, disables or permanently disable the BIOS module interface of the
optional Absolute Persistence Module service from Absolute Software.
By default, Enable Absolute is selected.
UEFI Boot Path Security
UEFI Boot Path Security Controls whether the system will prompt the user to enter the admin password
(if set) when booting to a UEFI boot path device from the F12 boot menu.
By default, Always Except Internal HDD is selected.
SafeShutter Enable or disable software controlled camera cover open/close activity.
Firmware Device Tamper Detection Enable or disable firmware tamper detection technology.
Table 12. System setup options—Passwords menu
Passwords
Admin Password Sets, changes, or deletes the administrator password (sometimes called
the "setup password"). The administrator password enables several security
features.
Password Configuration
Upper Case Letter When enabled, password must contain at least one upper case letter.
Default: OFF
Upper Case Letter When enabled, password must contain at least one lower case letter.
Default: OFF
Digit When enabled, password must contain at least one digit number.
Default: OFF
Special Character When enabled, password must contain at least one special character.
Default: OFF
Minimum Characters Sets the minimum number of characters allowed for passwords.
Default: 04
Password Bypass
Password Bypass When enabled, the system and the hard drive passwords are prompted when
the computer is powered on from the Off state.
By default, Disabled is selected.
Password Changes
Enable Non-Admin Password Changes When On, users can change the system and the hard drive password without
the need for administrator password.
Default: ON
Admin Setup Lockout
Enable Admin Setup Lockout Enables or disables the user from entering BIOS Setup when an administrator
password is set.
Default: OFF
64 BIOS setup