Installing the Camera
1.
Insert the camera to its place on the display assembly.
2.
Connect the camera cable to its connector.
3.
Install the:
a.
display panel
b.
display bezel
c.
battery
d.
base cover
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the eDP Cable
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
base cover
b.
battery
c.
memory
d.
hard-drive assembly
e.
keyboard trim
f.
keyboard
g.
palmrest
h.
display-hinge brackets
i.
display assembly
j.
display bezel
k.
display panel
3.
Perform the following steps to remove the eDP cable from the computer:
a. Disconnect the eDP cable from its connector [1].
b. Peel the eDP cable [2] and remove the eDP cable from the computer [3].
34