Installing the Power-Switch Board
1.
Place the power-switch board to its slot on the palmrest.
2.
Tighten the screws to secure the power-switch board to the palmrest.
3.
Install the:
a.
palmrest
b.
keyboard
c.
keyboard trim
d.
battery
e.
base cover
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the SmartCard Reader Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
base cover
b.
battery
c.
memory
d.
keyboard trim
e.
keyboard
f.
palmrest
3.
Perform the following steps:
a. Disconnect the SmartCard reader board cable from the USH board [1] [2].
b. Peel the cable to release from the adhesive [3].
17
