Dell Latitude 5424 Rugged Скачать руководство пользователя страница 42

Страница: 42 / 210

Intel HD Graphics Integrated

Intel HD graphics 620

This system can be configured with either of the following UMA graphic options or combined with any of the AMD discrete graphics
options.

Table 33. Intel HD graphics 620 specification

Integrated Graphics Controller

Intel HD Graphics 620

Bus Type

Internal PCIe

Memory Interface

N/A (unified memory architecture)

Graphics Level

GT2

Estimated Maximum Power Consumption (TDP)

15 W (included in the CPU power)

Display Support

On System:
HDMI 2.0

USB Type-C

Maximum Vertical Refresh Rate

Up to 85 Hz depending on resolution

Operating Systems Graphics/ Video API Support

Support for DirectX 12, OpenCL 2.0, OpenGL 4.3/4.4, OpenGL ES

Supported Resolutions and Max Refresh Rates (Hz) (Note: Analog
and/or digital)

System ports: Max Digital: (HDMI) 2560x1600, 4096x2304@24 Hz
Docked:

•

Max Digital: ( DisplayPort 1.2) 3840 x2160 @60 Hz

•

Max Digital: (SL-DVI) 1920x1080 @60 Hz

•

Analog: (VGA) system (14 inch/15 inch) 2048x1152 @60 Hz

For 3 displays : up to max resolution each above

Numbers of Displays Supported

•

System Ports: 3 displays max with LCD plus 2 displays max on

each output (HDMI, USB Type-C)

•

Docked: 3 displays max (combo of LCD, VGA, DP, HDMI)

Intel UHD Graphics 620

Table 34. Intel UHD Graphics 620 (8th Generation Intel Core) specification

Integrated Graphics Controller

Intel UHD Graphics 620 (8th Generation Intel Core)

Bus Type

Internal PCIe

Memory Interface

N/A (unified memory architecture)

Graphics Level

GT2

Estimated Maximum Power Consumption (TDP)

15 W (included in the CPU power)

Display Support

On System:
HDMI 2.0

USB Type-C

Technology and components

Содержание Latitude 5424 Rugged



















































































































































































































Результаты поиска

Содержание Latitude 5424 Rugged

Отзывы:

Dell Latitude 5424 Rugged, Руководство пользователя, Страница: 42 / 210

Результаты поиска

Содержание Latitude 5424 Rugged

Отзывы: