manualshive.com logo in svg

Dell Latitude 5424 Rugged, Руководство пользователя

Dell Latitude 5424 Rugged - надежный и прочный ноутбук, созданный для экстремальных условий. Владельцы могут бесплатно скачать Руководство пользователя на manualshive.com и узнать подробную информацию о функциях и настройках этого устройства. Отличный выбор для тех, кто ищет надежность и производительность в любых условиях.

Поделиться
Скачать
background image

Blinking pattern

Problem Description

Suggested Resolution

Green

White

3

4

BIOS recovery 2

Recovery image found but 
invalid

3

5

Power Rail Failure

EC ran into power 
sequencing failure

3

6

SBIOS Flash Corruption

Flash corruption detected by 
SBIOS

3

7

ME Error

Timeout waiting on ME to 
reply to HECI message

Wi-Fi power cycle

If your computer is unable to access the internet due to Wi-Fi connectivity issues a Wi-Fi power cycle procedure may be performed. The 
following procedure provides the instructions on how to conduct a Wi-Fi power cycle:

NOTE: 

Some ISPs (Internet Service Providers) provide a modem/router combo device.

1 

Turn off your computer.

2 

Turn off the modem.

3 

Turn off the wireless router.

4 

Wait for 30 seconds.

5 

Turn on the wireless router.

6 

Turn on the modem.

7 

Turn on your computer.

BIOS recovery

The BIOS recovery is designed to fix the main BIOS, and cannot work if the boot is damaged. The BIOS recovery will not work in the event 
of EC corruption, ME corruption, or a hardware related issue. The BIOS recovery image should be available on the unencrypted partition on 
the drive for BIOS recovery feature.

Rollback BIOS feature

Two versions of the BIOS recovery image are saved on the hard drive:

•

Current running BIOS (old)

•

To-be-updated BIOS (new)

The old version is already stored on the hard drive. The BIOS adds new version to the hard drive, maintains the old version, and deletes 
other existing versions. For example, A00 and A02 versions are already on the hard drive, A02 is the running BIOS. The BIOS adds A04, 
maintains A02, and deletes A00. Having two BIOS version enables the Rollback BIOS feature.

If the recovery file cannot be stored (hard drive is out of space), the BIOS sets a flag to indicate this condition. The flag is reset in the 
event it later becomes possible to store the recovery file. The BIOS notifies the user during POST and in BIOS Setup, the BIOS recovery is 
degraded. BIOS recovery through hard drive may not be possible, however BIOS recovery through USB flash drive is still possible.

For USB key: root directory or "\"

BIOS_IMG.rcv: the recovery image stored on the USB key.

206

Diagnostics

Содержание Latitude 5424 Rugged



















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Latitude 5424 Rugged

Clevo C4100 Service Manual preview
C4100
Бренд: Clevo Страницы: 92
Compaq Presario CQ41 Maintenance And Service Manual preview
Presario CQ41
Бренд: Compaq Страницы: 134
Acer Aspire 5670 Service Manual preview
Aspire 5670
Бренд: Acer Страницы: 135
Panasonic Toughbook CF-M34NPFZPM User Manual preview
Toughbook CF-M34NPFZPM
Бренд: Panasonic Страницы: 32
Krüger & Matz Explore PRO 1410 Owner'S Manual preview
Explore PRO 1410
Бренд: Krüger & Matz Страницы: 44
Lenovo 61A6 User Manual preview
61A6
Бренд: Lenovo Страницы: 41
Lenovo 432826U Brochure preview
432826U
Бренд: Lenovo Страницы: 2
Lenovo 43Y3111 Initial Setup preview
43Y3111
Бренд: Lenovo Страницы: 2
Lenovo 63664DU - ThinkPad X60 Tablet 6366 Supplementary Manual preview
63664DU - ThinkPad X60 Tablet 6366
Бренд: Lenovo Страницы: 74
Lenovo 43752BU User Manual preview
43752BU
Бренд: Lenovo Страницы: 44
Lenovo 64577WU Brochure preview
64577WU
Бренд: Lenovo Страницы: 4
Sharp Actius PC-AV18P Specifications preview
Actius PC-AV18P
Бренд: Sharp Страницы: 2
Sharp Actius PC-MV14 Supplement Manual preview
Actius PC-MV14
Бренд: Sharp Страницы: 12
Sharp PC-9080 Manual preview
PC-9080
Бренд: Sharp Страницы: 114
Sharp Actius PC-AV18P Operation Manual preview
Actius PC-AV18P
Бренд: Sharp Страницы: 128
Lenovo Legion Y920-17IKB User Manual preview
Legion Y920-17IKB
Бренд: Lenovo Страницы: 28
Lenovo N42-20 Chromebook User Manual preview
N42-20 Chromebook
Бренд: Lenovo Страницы: 44
Lenovo Legion Y730-15 series User Manual preview
Legion Y730-15 series
Бренд: Lenovo Страницы: 35

Бренды по названию

Популярные бренды

Загрузить еще бренды