Dell Latitude 3320, Руководство по обслуживанию

Страница: 19 / 81

Steps
1. Align the notch on the solid-state drive with the tab on the M.2 card connector.
2. Slide the solid-state drive into the M.2 card connector on the system board.
3. Align and place the solid-state drive bracket.
4. Install the screw (M2x3) that secures the solid-state drive bracket to the system board.
5. Close the solid-state drive mylar sheet to cover the solid-state drive.
NOTE: There is a protective mylar sheet covering the solid-state drive. This mylar sheet must be closed after the
installation procedure.
Next steps
1. Install the base cover .
2. Exit the service mode .
3. Install the microSD-card .
4. Follow the procedure in After working inside your computer .
Removing and installing components 19