Removing and installing components
This section provides detailed information on how to remove or install the components from your computer.
Recommended tools
The procedures in this document require the following tools:
•
Phillips #0 screwdriver
•
Phillips #1 screwdriver
•
Plastic scribe
NOTE:
The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4
microSD card
Removing microSD card
1
Follow the procedure in
Before working inside your computer
.
2
Press in on the microSD card to release it from the computer.
3
Remove the microSD card from the computer.
Installing microSD card
1
Slide the SD card into its slot until it clicks into place.
2
Install the
3
Follow the procedure in
After working inside your computer
.
Base cover
Removing base cover
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
3
To remove the base cover:
a Loosen the M2.5x7 captive screws that secure the base cover to the computer [1, 2].
2
8
Removing and installing components