Dell Inspiron One 2205 Скачать руководство пользователя страница 35

Страница: 35 / 74

Back to Contents Page

Infrared Card (Optional)

Dell™ Inspiron™ One 2205 Service Manual

Removing the Infrared Card

Replacing the Infrared Card

Removing the Infrared Card

Follow the instructions in

Before You Begin

Follow the instructions from

step 2

step 9

Removing the Display Bezel

Turn the display bezel over.

Remove the screw that secures the infrared card to the display bezel.

Disconnect the infrared-card cable from the connector on the infrared card.

Lift the infrared card away from the display bezel.

Replacing the Infrared Card

Follow the instructions in

Before You Begin

Connect the infrared-card cable to the connector on the infrared card.

Align the screw holes on the infrared card with the screw holes on the display bezel.

Replace the screw that secures the infrared card to the display bezel.

Turn the display bezel over.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

infrared card

screw

infrared-card cable connector

Содержание Inspiron One 2205











































































Результаты поиска

Содержание Inspiron One 2205

Отзывы:

Dell Inspiron One 2205, Руководство по обслуживанию, Страница: 35 / 74

Результаты поиска

Содержание Inspiron One 2205

Отзывы: