Dell Inspiron One 2205 Скачать руководство пользователя страница 31

Страница: 31 / 74

Back to Contents Page

Converter Card

Dell™ Inspiron™ One 2205 Service Manual

Removing the Converter Card

Replacing the Converter Card

Removing the Converter Card

Follow the instructions in

Before You Begin

Remove the back cover (see

Removing the Back Cover

Remove the two screws that secure the converter card to the chassis.

Disconnect the cables from the connectors on the converter card.

Lift the converter card away from the chassis.

Replacing the Converter Card

Follow the instructions in

Before You Begin

Align the screw holes on the converter card with the screw holes on the chassis.

Connect the cables to the connectors on the converter card.

Replace the two screws that secure the converter card to the chassis.

Replace the back cover (see

Replacing the Back Cover

Connect your computer and all attached devices to electrical outlets, and turn them on.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

converter card

screws (2)

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

Содержание Inspiron One 2205











































































Результаты поиска

Содержание Inspiron One 2205

Отзывы:

Похожие инструкции для Inspiron One 2205

Бренды по названию

Популярные бренды

Dell Inspiron One 2205, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron One 2205

Отзывы:

Похожие инструкции для Inspiron One 2205

Бренды по названию

Популярные бренды