Replacing the Processor Heat Sink
1.
Follow the instructions in
Before You Begin
.
2.
Place the processor heat sink on the system board.
3.
Align the four captive screws on the processor heat sink with the screw holes on the system board and tighten the screws in sequential order (indicated
on the processor heat sink).
4.
Route the cables through the routing guides. Connect the fan cable and display cable to their connectors on the system board.
5.
Replace the adhesive tape that secures the display cable to the processor heat sink.
6.
Replace the palm rest (see
Replacing the Palm Rest
).
7.
Replace the keyboard (see
Replacing the Keyboard
).
8.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
1
processor heat sink
2
captive screws (4)
NOTE:
This procedure assumes that you have already removed the processor heat sink and are ready to replace it.
NOTE:
The appearance and number of screws on the processor heat sink may vary based on the your computer model.
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Содержание Inspiron M5030
Страница 25: ...Back to Contents Page ...
Страница 36: ......