4
To remove display panel:
a Peel the adhesive tape to access the eDP cable [1].
b Remove the blue adhesive tape [2].
c Lift the metal tab display panel [3].
d Disconnect the cable and lift the display panel.
Installing the display panel
NOTE:
For non touch systems perform following steps.
1
To install the display panel:
a Connect the eDP cable to the connector on the back of the display panel and affix the adhesive tape.
b Align the display panel with the tabs on the display assembly.
c Replace the M2.0X3 screws to secure the display panel to the display assembly.
2
Install the:
a
b
c
d
e
f
g
h
3
Follow the procedure in
After working inside your computer
.
Disassembly and reassembly
45