Installing the keyboard
1
Align the keyboard and route the cables back through to the bottom of the compartment.
2
Press and align the keyboard to its compartment.
3
Replace the screws to secure the keyboard to the computer.
4
Slide the keyboard trim and align it to its position on the computer. Ensure that the keyboard trim clicks into its place
5
Connect the keyboard data cables to the touchpad board.
NOTE:
Ensure that you fold the keyboard data cable in perfect alignment.
6
Affix the tape on the keyboard data cables.
7
Install the:
a
b
c
8
Follow the procedure in
After working inside your computer
.
Base cover
Removing the base cover
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
3
To remove base cover:
a Remove the M2.5X5.0 screws that secure the base cover to the computer [1].
b Slide and lift the base cover away from the computer [2].
Disassembly and reassembly
15
