Dell Inspiron 7400 Скачать руководство пользователя страница 90

Страница: 90 / 112

System setup

CAUTION:

Unless you are an expert computer user, do not change the settings in the BIOS Setup program.

Certain changes can make your computer work incorrectly.

NOTE:

Before you change BIOS Setup program, it is recommended that you write down the BIOS Setup program screen

information for future reference.

Use the BIOS Setup program for the following purposes:

●

Get information about the hardware installed in your computer, such as the amount of RAM and the size of the hard drive.

●

Change the system configuration information.

●

Set or change a user-selectable option, such as the user password, type of hard drive installed, and enabling or disabling
base devices.

Topics:

•

BIOS overview

•

Entering BIOS setup program

•

•

•

•

•

System and setup password

•

Clearing CMOS settings

•

Clearing BIOS (System Setup) and System passwords

BIOS overview

The BIOS manages data flow between the computer's operating system and attached devices such as hard disk, video adapter,
keyboard, mouse, and printer.

Entering BIOS setup program

1. Turn on your computer.
2. Press F2 immediately to enter the BIOS setup program.

NOTE:

If you wait too long and the operating system logo appears, continue to wait until you see the desktop. Then,

turn off your computer and try again.

Navigation keys

NOTE:

For most of the System Setup options, changes that you make are recorded but do not take effect until you restart

the system.

Table 2. Navigation keys

Keys

Navigation

Up arrow

Moves to the previous field.

Down arrow

Moves to the next field.

System setup

Содержание Inspiron 7400

















































































































Результаты поиска

Содержание Inspiron 7400

Отзывы:

Похожие инструкции для Inspiron 7400

Бренды по названию

Популярные бренды

Dell Inspiron 7400, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 7400

Отзывы:

Похожие инструкции для Inspiron 7400

Бренды по названию

Популярные бренды