Replacing the Front I/O Panel
1.
Follow the instructions in
Before You Begin
.
2.
Align and slide the front I/O panel clamps into the front I/O panel clamp slots.
3.
Replace the screw that secures the front I/O panel to the front panel.
4.
Connect the front I/O panel cables to the system board connectors, AUDIOF1, USBF1, and USBF2 (see
System Board Components
).
5.
Replace the front bezel (see
Replacing the Front Bezel
).
6.
Replace the computer cover (see
Replacing the Computer Cover
).
7.
Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION:
To avoid damage to the cable connectors and the cable routing clips, carefully slide the front I/O panel into the front I/O panel clamp
slot.