Dell Inspiron 620 страница 12 Скачать руководство пользователя

Страница: 12 / 44

Back to Contents Page

Coin-Cell Battery

Dell™ Inspiron™ 620 Service Manual

Removing the Coin-Cell Battery

Replacing the Coin-Cell Battery

Removing the Coin-Cell Battery

Record all the screens in system setup (see

System Setup

) so that you can restore the correct settings after the new coin-cell battery has been

installed.

Follow the instructions in

Before You Begin

Remove the computer cover (see

Removing the Computer Cover

Locate the battery socket on the system board (see

System Board Components

Press the battery-release lever to remove the coin-cell battery.

Set aside the battery in a secure location.

Replacing the Coin-Cell Battery

Follow the instructions in

Before You Begin

Insert the new coin-cell battery (CR2032) into the socket with the side labeled "+" facing up, and press the coin-cell battery into place.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

WARNING:

A new battery can explode if it is incorrectly installed. Replace the battery only with the same or equivalent type recommended by the

manufacturer. Discard used batteries according to the manufacturer's instructions.

WARNING:

To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

WARNING:

Do not operate your computer with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)

removed.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is

not covered by your warranty.

CAUTION:

If you pry the battery out of its socket with a blunt object, be careful not to touch the system board with the object. Ensure that the

object is inserted between the battery and the socket before you attempt to pry out the battery. Otherwise, you may damage the system board by
prying off the socket or by breaking circuit traces on the system board.

1 battery-release lever 2 coin-cell battery

3 battery socket

Содержание Inspiron 620













































Результаты поиска

Содержание Inspiron 620

Отзывы:

Похожие инструкции для Inspiron 620

Бренды по названию

Популярные бренды

Dell Inspiron 620, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 620

Отзывы:

Похожие инструкции для Inspiron 620

Бренды по названию

Популярные бренды