Dell Inspiron 5485 Скачать руководство пользователя | Manualshive

Страница: 74 / 76

background image

Troubleshooting

Enhanced Pre-Boot System Assessment (ePSA)
diagnostics

The ePSA diagnostics (also known as system diagnostics) performs a complete check of your hardware. The ePSA is embedded with the
BIOS and is launched by the BIOS internally. The embedded system diagnostics provides a set of options for particular devices or device
groups allowing you to:

•

Run tests automatically or in an interactive mode

•

Repeat tests

•

Display or save test results

•

Run thorough tests to introduce additional test options to provide extra information about the failed device(s)

•

View status messages that inform you if tests are completed successfully

•

View error messages that inform you of problems encountered during testing

NOTE:

Some tests for specific devices require user interaction. Always ensure that you are present at the computer

terminal when the diagnostic tests are performed.

Running the ePSA diagnostics

1. Turn on your computer.
2. As the computer boots, press the F12 key as the Dell logo appears.
3. On the boot menu screen, select the

Diagnostics

option.

4. Click the arrow at the bottom left corner.

Diagnostics front page is displayed.

5. Click the arrow in the lower-right corner to go to the page listing.

The items detected are listed.

6. To run a diagnostic test on a specific device, press Esc and click

Yes

to stop the diagnostic test.

7. Select the device from the left pane and click

Run Tests

.

8. If there are any issues, error codes are displayed.

Note the error code and validation number and contact Dell.

System diagnostic lights

Power and battery-status light/hard-drive activity light

Indicates the battery-charge status or the hard-drive activity.

NOTE:

Press Fn+H to toggle this light between power and battery-status light and hard-drive activity light.

Hard-drive activity light

Turns on when the computer reads from or writes to the hard drive.

NOTE:

Hard-drive activity light is supported only on computers shipped with hard drive.

Power and battery-status light

Indicates the power and battery-charge status

Solid white

— Power adapter is connected and the battery has more than 5 percent charge.

Amber

— Computer is running on battery and the battery has less than 5 percent charge.

42

74

Troubleshooting

«
...
72
73
74
75
76
»

Содержание Inspiron 5485













































































Отзывы:

Нет отзывов

Похожие инструкции для Inspiron 5485

Бренд: MSI Страницы: 86

Бренд: Xebec Страницы: 15

Бренд: ECS Страницы: 92

ESPRIMO Mobile U9210

Бренд: Fujitsu Страницы: 6

ESPRIMO Mobile V5505

Бренд: Fujitsu Страницы: 27

Бренд: Fujitsu Страницы: 92

Бренд: Fujitsu Страницы: 2

ESPRIMO Mobile V6555

Бренд: Fujitsu Страницы: 34

ESPRIMO Mobile V6535

Бренд: Fujitsu Страницы: 5

E8110 - LifeBook - Core 2 Duo 1.66 GHz

Бренд: Fujitsu Страницы: 128

Бренд: Fujitsu Страницы: 52

Бренд: Fujitsu Страницы: 212

Бренд: Fujitsu Страницы: 2

Бренд: Haier Страницы: 24

Бренд: Haier Страницы: 35

Бренд: Dell Страницы: 89

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 90

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды