Dell Inspiron 5485 Скачать руководство пользователя страница 72

Страница: 72 / 76

Security

Default: Disabled

Firmware TPM

Enable or disable the firmware TPM.

Default: Enabled

PPI Bypass for Clear Command

Allows you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip BIOS
PPI user prompts when issuing the Clear command. Changes to
this setting take effect immediately.

Default: Disabled

UEFI Firmware Capsule Updates

Enables or disables BIOS updates through UEFI capsule update
packages.

Default: Enabled

WINDOWS SMM SECURITY MITIGATIONS TABLE (WSMT)

Enables or disables configuration of platform features on Dell
Client Systems with WSMT-enabled BIOS.

Default: Enabled

Table 6. System setup options—Boot menu

Boot

Fast Boot

Enables or disables the fast boot option.

Default: Minimal

Secure Boot

Enables or disables the secure boot feature.

Default: Disabled

Load Legacy Option ROMs

Enables or disables the Load Legacy Option ROMs.

Default: Disabled

Boot List Option

Displays the available boot options.

Default: UEFI

Attempt Legacy Boot

Enables or disables legacy boot.

Default: Disabled

File Browser Add Boot Option

Allows you to add the boot options.

Table 7. System setup options—Exit menu

Exit

Exit Saving Changes

Allows you to exit system setup and save your changes.

Save Change Without Exit

Allows you to save your changes without exiting the BIOS setup.

Exit Discarding Changes

Allows you to exit the BIOS setup without saving the changes.

Load Optimal Defaults

Allows you to restore default values for all system setup options.

Discard Changes

Allows you to load previous values for all system setup options.

Clearing CMOS settings

CAUTION:

Clearing CMOS settings will reset the BIOS settings on your computer.

1. Remove the

base cover

2. Disconnect the battery cable from the system board.
3. Remove the

coin-cell battery

System setup

Содержание Inspiron 5485













































































Результаты поиска

Содержание Inspiron 5485

Отзывы:

Бренды по названию

Популярные бренды

Dell Inspiron 5485, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 5485

Отзывы:

Бренды по названию

Популярные бренды