Dell Inspiron 3880 Скачать руководство пользователя страница 50

Страница: 50 / 62

Table 3. System setup options—System information menu(continued)

General-System Information

HT Capable

Displays whether the processor is HyperThreading (HT) capable.

64-Bit Technology

Displays whether 64-bit technology is used.

Device Information

SATA-0

Displays the SATA device information of the computer.

SATA-1

Displays the SATA device information of the computer.

M.2 PCIe SSD-2

Displays the M.2 PCIe SSD information of the computer.

LOM MAC Address

Displays the LOM MAC address of the computer.

Video Controller

Displays the video controller type of the computer.

Audio Controller

Displays the audio controller information of the computer.

Wi-Fi Device

Displays the wireless device information of the computer.

Bluetooth Device

Displays the bluetooth device information of the computer.

Boot Sequence

Boot Sequence

Displays the boot sequence.

Boot List Option

Displays the available boot options.

UEFI Boot Path Security

Always,Except Internal HDD

Enable or disable the system to prompt the user to enter the Admin password when
booting a UEFI boot path from the F12 boot menu. Default: Enabled

Always

Enable or disable the system to prompt the user to enter the Admin password when
booting a UEFI boot path from the F12 boot menu. Default: Disabled

Never

Enable or disable the system to prompt the user to enter the Admin password when
booting a UEFI boot path from the F12 boot menu. Default: Disabled

Date/Time

Displays the current date in MM/DD/YY format and current time in HH:MM:SS
AM/PM format.

Table 4. System setup options—System Configuration menu

System Configuration

Integrated NIC

Controls the on-board LAN controller.

Enable UEFI Network Stack

Enable or disable UEFI Network Stack.

SATA Operation

Configure operating mode of the integrated SATA hard drive controller.

Drives

Enable or disable various drives on board.

SATA-0

Displays the SATA device information of the computer.

SATA-1

Displays the SATA device information of the computer.

M.2 PCIe SSD-2

Displays the M.2 PCIe SSD information of the computer.

SMART Reporting

Enable or disable SMART Reporting during system startup.

USB Configuration

Enable USB Boot Support

Enable or disable booting from USB mass storage devices such as external hard
drive, optical drive, and USB drive.

Enable front USB Port

Enable or disable the front USB ports.

Enable rear USB Port

Enable or disable the rear USB ports.

Front USB Configuration

Enable or disable the front USB ports.

Rear USB Configuration

Enable or disable the rear USB ports.

Audio

Enable or disable the integrated audio controller.

System setup

Содержание Inspiron 3880































































Результаты поиска

Содержание Inspiron 3880

Отзывы:

Dell Inspiron 3880, Руководство по обслуживанию, Страница: 50 / 62

Результаты поиска

Содержание Inspiron 3880

Отзывы: