Dell Inspiron 3670 Скачать руководство пользователя страница 67

Страница: 67 / 76

Advanced

USB Wake Support

Enables you to enable the USB devices to wake the computer from
Standby.

Numlock Key

Enables you to set the status of the Numlock key during boot to On
or Off.
Default: Disabled

SupportAssist System Resolution

Auto OS Recovery Threshold

Control the automatic boot flow for SupportAssist System
Resolution Console and for Dell OS Recovery tool.

SupportAssist OS Recovery

The SupportAssist OS Recovery option will enable or disable the

boot flow for SupportAssist OS Recovery tool in the event of

certain system errors. If the SupportAssist OS Recovery setup

option is set to disabled then all automatic boot flow for

SupportAssist OS Recovery tool will be disabled.

Default: Disabled

Table 8. System setup options—Security menu

Security

Unlock Setup Status

Displays if the setup status is unlocked.

Admin Password Status

Displays whether the admin password is set.

System Password Status

Displays whether the system password is set.

HDD Password Status

Displays if the hard drive password is set.

Admin Password

Enables you to set the admin password.

System Password

Enables you to set the system password.

HDD Password

Enables you to set the hard drive password.

Password Change

Enable or disable changes to the System and Hard Disk
passwords when an administrator password is set.

Computrace

Enable or disable tracking assets and providing recovery
services in the event the computer is lost or stolen.
Default: Deactivate

Firmware TPM

Enables you to enable or disable the firmware TPM function.
Default: Enabled

PPI Bypass for Clear Command

Allows you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip BIOS
PPI user prompts when issuing the Clear command. Changes to
this setting take effect immediately.
Default: Disabled

UEFI Firmware Capsule Updates

Enables you to enable or disable the UEFI Firmware Capsule
Updates function.
Default: Enabled

System setup

Содержание Inspiron 3670













































































Результаты поиска

Содержание Inspiron 3670

Отзывы:

Dell Inspiron 3670, Руководство по обслуживанию, Страница: 67 / 76

Результаты поиска

Содержание Inspiron 3670

Отзывы: