background image

Replacing the 3.5-inch hard drive

WARNING: Before working inside your computer, read the safety 
information that shipped with your computer and follow the steps in 

Before 

working inside your computer

. After working inside your computer, follow 

the instructions in 

After working inside your computer

. For more safety best 

practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

 

Procedure

Place the hard drive in the hard-drive bracket.

Align the screw holes on the hard drive with the screw holes on the hard-drive 
bracket.

Replace the four screws (#6-32xL3.6) that secure the hard-drive bracket to the 
hard drive.

Slide the hard-drive assembly into the slot on the side-chassis until it snaps into 
place.

Connect the data cable and the power cable to the hard drive.

Rotate the side-chassis towards the computer until it snaps into place.

Replace the screw (#6-32xL6.35) that secures the hard-drive assembly to the 
side-chassis.

Place the computer in an upright position.

Post-requisites

Replace the 

front bezel

.

Replace the 

computer cover

.

39

Содержание Inspiron 3668

































































































Отзывы: