Removing the M.2 2280 solid-state drive
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
About this task
NOTE:
The M.2 card that is installed on your computer depends on the configuration ordered. The supported card
configurations on the M.2 card slot are:
●
M.2 2230 solid-state drive
●
M.2 2280 solid-state drive
NOTE:
This procedure applies only to computers shipped with an M.2 2280 solid-state drive installed.
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
Steps
1. Remove the screw (M2x3.5) that secures the M.2 2280 solid-state drive to the system board.
2. Slide and remove the solid-state drive from the M.2 solid-state drive slot on the system board.
Installing the M.2 2280 solid-state drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
About this task
NOTE:
The M.2 card that is installed on your computer depends on the configuration ordered. The supported card
configurations on the M.2 card slot are:
32
Removing and installing components
Содержание Inspiron 27 7710 All-in-One
Страница 50: ...50 Removing and installing components ...
Страница 53: ...Removing and installing components 53 ...
