Dell Inspiron 24 5415, Руководство по обслуживанию

Страница: 34 / 82

Steps
1. Ensure that the thermal pad covering the M.2 2280 slot on the system board is in place.
2. Align the notch on the solid-state drive with the tab on the M.2 card slot.
3. Slide the solid-state drive into the M.2 card slot on the system board.
4. Replace the screw (M2x3.5) that secures the solid-state drive to the system board.
Next steps
1. Install the system-board shield .
2. Install the I/O cover .
3. Install the back cover .
4. Install the stand .
5. Follow the procedure in After working inside your computer .
Retractable-camera assembly
Removing the retractable-camera assembly
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the stand .
3. Remove the back cover .
4. Remove the I/O cover .
5. Remove the system-board shield .
About this task
The following image indicates the location of the retractable-camera assembly and provides a visual representation of the
removal procedure.
34 Removing and installing components