Replacing the Camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the camera into the camera bracket.
2
Connect the camera cable to the camera.
3
Align the screw holes on the camera assembly with the screw holes on
the display bezel.
4
Replace the screws that secure the camera assembly to the display bezel.
5
Adhere the Aluminium foil tape that secures the camera assembly to the
display bezel.
Post-requisites
1
Replace the
back cover
.
2
Replace the
computer base
.
3
Replace the
base cover
.
67
Содержание Inspiron 23
