background image

Removing the display hinges

WARNING: 

Before working inside your computer, read the safety information 

that shipped with your computer and follow the steps in 

Before working inside your computer

. After working inside your computer, 

follow the instructions in 

After working inside your computer

. For more 

safety best practices, see the Regulatory Compliance home page at 
www.dell.com/regulatory_compliance. 

 

Topics:

Prerequisites

Procedure

Prerequisites

NOTE: 

These instructions are applicable only for laptops with a non-touchscreen 

display.

Remove the 

battery

.

Follow the procedure from step 1 to step 3 in “Removing the 

optical drive

”.

Remove the 

keyboard

.

Follow the procedure from step 1 to step 5 in “Removing the 

base cover

”.

Follow the procedure from step 1 to step 3 in “Removing the 

hard drive

”.

Remove the 

memory module

.

Remove the 

wireless card

.

Remove the 

I/O board

.

Remove the 

heat-sink assembly

.

10  Remove the 

system board

.

11  Remove the 

display assembly

.

12  Remove the 

display bezel

.

13  Remove the 

display panel

.

43

Removing the display hinges

103

Содержание Inspiron 15

















































































































Отзывы: