background image

Removing the system board

WARNING: Before working inside your computer, read the safety 
information that shipped with your computer and follow the steps in 

Before working inside your computer

. After working inside your 

computer, follow the instructions in 

After working inside your 

computer

. For more safety best practices, see the Regulatory 

Compliance home page at www.dell.com/regulatory_compliance. 

NOTE: Your computer’s Service Tag is stored in the system board. You 
must enter the Service Tag in the BIOS setup program after you replace 

the system board.

NOTE: Replacing the system board removes any changes you have 

made to the BIOS using the BIOS setup program. You must make the 

desired changes again after you replace the system board.

NOTE: Before disconnecting the cables from the system board, note the 

location of the connectors so that you can reconnect the cables 

correctly after you replace the system board.

 

Prerequisites

Remove the 

base cover

.

Remove the 

battery

.

Follow the procedure from step 1 to step 3 in “

Removing the hard drive

”.

Remove the 

memory modules

.

Remove the 

wireless card

.

Remove the 

keyboard

.

Follow the procedure from step 1 to step 7 in “

Removing the palm rest

”.

Remove the 

I/O board

.

Remove the 

fans

.

Procedure

Using the pull tab, disconnect the display cable from the system board.

60

Содержание Inspiron 15-7559



































































































Отзывы: