background image

Replacing the system board

WARNING: Before working inside your computer, read the safety 
information that shipped with your computer and follow the steps in 

Before 

working inside your computer

. After working inside your computer, follow 

the instructions in 

After working inside your computer

. For more safety best 

practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

NOTE: Your computer’s Service Tag is stored in the system board. You 
must enter the Service Tag in the BIOS setup program after you replace the 
system board.

NOTE: Replacing the system board removes any changes you have made to 
the BIOS using the BIOS setup program. You must make the appropriate 
changes again after you replace the system board.

 

Procedure

Align the screw holes on the system board with the screw holes on the 
computer base.

Replace the screws that secure the system board to the computer base.

Slide the keyboard cable into the system-board connector and slide the latches 
to secure the cable.

Adhere the tape to the keyboard-cable connector on the system board.

Slide the touch-pad cable and keyboard-backlight cable into the system-board 
connectors and press down on the latches to secure the cable.

Connect the hard-drive cable, power-adapter port cable, and speaker cable to 
the system board.

Slide the Windows-button board cable into the system-board connector and 
press down on the latch to secure the cable.

Adhere the tape to the Windows-button board connector.

Connect the display cable to the system board.

10 

Align the screw holes on the display-cable bracket with the screw holes on the 
system board.

11 

Replace the screws that secure the display-cable bracket to the system board.

74

Содержание Inspiron 15-7558






















































































Отзывы: