Dell Inspiron 1150 Скачать руководство пользователя страница 56

Страница: 56 / 62

System Board: Dell Inspiron 1150 Service Manual

20. Lift the front of the system board out and away from the base plastics.

Installing the System Board

1. Insert the video connector on the replacement system board through the back of the base

plastics.

2. Replace the two hex nuts that secure the video connector to the base plastics.

3. Replace the two M2.5 x 6-mm screws that secure the left antenna, which is located between the

hard drive and optical drive cages, to the system board.

4. Replace the two M2.5 x 5-mm screws that secure the optical drive cage to the system board.

5. Replace the two M2.5 x 5-mm screws that secure the hard drive cage to the system board.

6. Replace the two M2.5 x 5-mm screws that secure the chipset heat sink to the system board.

7. Replace the battery bay shield, and reinstall the two M2.5 x 5-mm screws that secure the shield

to the system board.

8. Replace the

speakers

9. Replace the

microprocessor

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LAP...ecked%20ok/Inspiron/1150/1150%20SM/sysboard.htm (5 of 6)6/21/2004 12:41:11 AM

Содержание Inspiron 1150































































Результаты поиска

Содержание Inspiron 1150

Отзывы:

Dell Inspiron 1150, Руководство по обслуживанию, Страница: 56 / 62

Результаты поиска

Содержание Inspiron 1150

Отзывы: