Dell Inspiron 1150 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 62

Dell Inspiron 1150 Скачать руководство пользователя страница 47

Microprocessor Module: Dell Inspiron 1150 Service Manual

1 ZIF-socket cam screw

2 ZIF socket

3 microprocessor module

4 pin-1 corner of

microprocessor

5 triangle on system board

6. Use a microprocessor extraction tool to remove the microprocessor module.

Installing the Microprocessor Module

NOTICE:

Ensure that the cam lock is in the fully open position before seating the

microprocessor module. Seating the microprocessor module properly in the ZIF socket does not

require force.

NOTICE:

A microprocessor module that is not properly seated can result in an intermittent

connection or permanent damage to the microprocessor and ZIF socket.

1. Align the pin-1 corner of the microprocessor module so that it points to the triangle on the

system board, and insert the microprocessor module into the ZIF socket.

When the microprocessor module is correctly seated, all four corners are aligned at the same

height. If one or more corners of the module are higher than the others, the module is not seated

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LAP...PS_checked%20ok/Inspiron/1150/1150%20SM/cpu.htm (2 of 3)6/21/2004 12:41:09 AM

«
...
45
46
47
48
49
...
»

Содержание Inspiron 1150































































Отзывы:

Нет отзывов