Replacing the processor fan
and heat-sink assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance
.
Procedure
1
Align the screw holes on the processor fan and heat-sink assembly with
the screw holes on the system board.
2
In sequential order, (indicated on the heat sink), tighten the captive
screws that secure the processor fan and heat-sink assembly to the
system board.
3
Adhere the tape that secures the processor fan to the display-cable
bracket.
Post-requisites
1
.
2
.
34
Содержание Inspiron 11 3168
