background image

Back to Contents Page

  

Dell™ Inspiron™ 1018 Service Manual 

 

 

Information in this document is subject to change without notice. 

© 2010 Dell Inc. All rights reserved.

 

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. 

Trademarks used in this text: 

Dell

, the 

DELL

 logo, and 

Inspiron

 are trademarks of Dell Inc.; 

Bluetooth

 is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell 

under license; 

Microsoft

Windows, 

and the 

Windows

 start button logo are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other 

countries. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

July 2010 Rev. A00 

Back to Contents Page

 

 

 

 

NOTE: 

A NOTE indicates important information that helps you make better use of your computer. 

 

CAUTION: 

A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. 

 

WARNING: 

A WARNING indicates a potential for property damage, personal injury, or death. 

Содержание Inspiron 1018















































Отзывы: