l
Mobile Broadband or Wireless Wide Area Network (WWAN)
Removing the Mini-Card
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Disconnect the antenna cables from the Mini-Card.
5.
Release the Mini-Card by removing the two screws that secure the
Mini-Card to the system board.
6.
Lift the Mini-Card out of its system board connector.
Replacing the Mini-Card
1 Mini-Card
2 screws (2)
3 antenna cable connector (2)
CAUTION:
When the Mini-Card is not in the computer, store it in protective antistatic packaging (see "Protecting Against Electrostatic Discharge"
in the safety instructions that shipped with your computer).
CAUTION:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system
board, and realign the card.
CAUTION:
To avoid damage to the Mini-Card, never place cables under the card.
Содержание Inspiron 1010
Страница 38: ...5 Release the key combination Back to Contents Page ...
Страница 42: ......