manualshive.com logo in svg

Dell iDRAC 7, Руководство пользователя, Страница: 230 / 309

Поделиться
Скачать
Dell iDRAC 7 Скачать руководство пользователя страница 230

desktop. For correct mouse synchronization in the iDRAC Virtual Console, this feature must be disabled. To disable Predictable 
Pointer Acceleration, in the mouse section of the 

/etc/X11/xorg.conf

 file, add:

Option "AccelerationScheme" "lightweight"

.

If synchronization problems continue, do the following additional change in the 

<user_home>/.gconf/desktop/gnome/

peripherals/mouse/%gconf.xml

 file:

Change the values for 

motion_threshold

 and 

motion_acceleration

 to 

-1

.

If you turn off mouse acceleration in GNOME desktop, in the Virtual Console viewer, go to 

Tools

 → 

Session Options

 → 

Mouse

. 

Under 

Mouse Acceleration

 tab, select 

None

.

For exclusive access to the managed server console, you must disable the local console and re-configure the 

Max Sessions

 to 

1

 on 

the 

Virtual Console page

.

Passing all keystrokes through virtual console for Java or ActiveX plug-in

You can enable the 

Pass all keystrokes to server

 option and send all keystrokes and key combinations from the management 

station to the managed system through the Virtual Console Viewer. If it is disabled, it directs all the key combinations to the 
management station where the Virtual Console session is running. To pass all keystrokes to the server, in the Virtual Console Viewer, 
go to 

Tools 

→ 

Session Options

 → 

General

 tab and select the 

Pass all keystrokes to server

 option to pass the management 

station's keystrokes to the managed system.

The behavior of the Pass all keystrokes to server feature depends on the:

•

Plug-in type (Java or ActiveX) based on which Virtual Console session is launched.
For the Java client, the native library must be loaded for Pass all keystrokes to server and Single Cursor mode to function. If the 
native libraries are not loaded, the 

Pass all keystrokes to server

 and 

Single Cursor

 options are deselected. If you attempt to 

select either of these options, an error message is displayed indicating that the selected options are not supported.

For the ActiveX client, the native library must be loaded for Pass all keystrokes to server function to work. If the native libraries 
are not loaded, the 

Pass all keystrokes to server 

option is deselected. If you attempt to select this option, an error message is 

displayed indicating that the feature is not supported

For MAC operating systems, enable the

 Enable access of assistive device

 option in 

Universal Access

 for the Pass all 

keystrokes to server feature to work.

•

Operating system running on the management station and managed system. The key combinations that are meaningful to the 

operating system on the management station are not passed to the managed system.

•

Virtual Console Viewer mode—Windowed or Full Screen.
In Full Screen mode, 

Pass all keystrokes to server

 is enabled by default.

In Windowed mode, the keys passed only when the Virtual Console Viewer is visible and is active.

When changed from Full Screen mode to Windowed mode, the previous state of Pass all keys is resumed.

Related links

Java-based virtual console session running on Windows operating system
Java based virtual console session running on Linux operating system
ActiveX based virtual console session running on Windows operating system

Java-based virtual console session running on Windows operating system

•

Ctrl+Alt+Del key is not sent to the managed system, but always interpreted by the management station.

•

When Pass All Keystrokes to Server is enabled, the following keys are not sent to the managed system:

– Browser Back Key

230

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов