manualshive.com logo in svg

Dell iDRAC 7, Руководство пользователя, Страница: 231 / 309

Поделиться
Скачать
Dell iDRAC 7 Скачать руководство пользователя страница 231

– Browser Forward Key
– Browser Refresh key
– Browser Stop Key
– Browser Search Key
– Browser Favorites key
– Browser Start and Home key
– Volume mute key
– Volume down key
– Volume up key
– Next track key
– Previous track key
– Stop Media key
– Play/Pause media key
– Start mail key
– Select media key
– Start Application 1 key
– Start Application 2 key

•

All the individual keys (not a combination of different keys, but a single key stroke) are always sent to the managed system. This 

includes all the Function keys, Shift, Alt, Ctrl key and Menu keys. Some of these keys affect both management station and 

managed system.
For example, if the management station and the managed system is running Windows operating system, and Pass All Keys is 
disabled, when you press the Windows key to open the 

Start

 Menu, the 

Start

 menu opens on both management station and 

managed system. However, if Pass All Keys is enabled, then the 

Start

 menu is opened only on the managed system and not on 

the management station.

•

When Pass All Keys is disabled, the behavior depends on the key combinations pressed and the special combinations interpreted 

by the operating system on the management station.

Java based virtual console session running on Linux operating system

The behavior mentioned for Windows operating system is also applicable for Linux operating system with the following exceptions:

•

When Pass all keystrokes to server is enabled, <Ctrl+Alt+Del> is passed to the operating system on the managed system.

•

Magic SysRq keys are key combinations interpreted by the Linux Kernel. It is useful if the operating system on the management 

station or the managed system freezes and you need to recover the system. You can enable the magic SysRq keys on the Linux 

operating system using one of the following methods:

– Add an entry to 

/etc/sysctl.conf

– echo "1" > /proc/sys/kernel/sysrq

•

When Pass all keystrokes to server is enabled, the magic SysRq keys are sent to the operating system on the managed system. 

The key sequence behavior to reset the operating system, that is reboot without un-mounting or sync, depends on whether the 

magic SysRq is enabled or disabled on the management station:

– If SysRq is enabled on the management station, then <Ctrl+Alt+SysRq+b> or <Alt+SysRq+b> resets the management 

station irrespective of the system’s state.

– If SysRq is disabled on the management station, then the <Ctrl+Alt+SysRq+b> or <Alt+SysRq+b>keys resets the operating 

system on the managed system.

– Other SysRq key combinations (example, <Alt+SysRq+k>, <Ctrl+Alt+SysRq+m>, and so on) are passed to the managed 

system irrespective of the SysRq keys enabled or not on the management station.

Using SysRq magic keys through remote console

You can enable SysRq magic keys through the remote console using any of the following:

•

Opensoure IPMI tool

•

Using SSH/Telnet or External Serial Connector

231

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов