Dell G7 7700, Руководство по обслуживанию, Страница: 82 / 96

Table 9. System setup options—Power menu(continued)
Power
Block Sleep Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF
NOTE: If enabled, the computer will not go to sleep, Intel Rapid Start will
be disabled automatically, and the operating system power option will be
blank if it was set to Sleep.
Lid Switch
Enable Lid Switch Enables or disables the lid switch.
Default: ON
Power On Lid Open Enables the computer to power up from the off state whenever the lid is opened.
Default: ON
Intel Speed Shift Technology Enables or disables the Intel Speed Shift Technology support. Setting this option to
enable allows the operating system to select the appropriate processor performance
automatically.
Default: ON
Table 10. System setup options—Security menu
Security
TPM 2.0 Security On Select whether or not the Trusted Platform Model (TPM) is visible to the OS.
Default: ON
PPI Bypass for Enable Commands Enables or disables the OS to skip BIOS Physical Presence Interface (PPI) user
prompts when issuing TPM PPI enabled and activate commands.
Default: OFF
PPI Bypass for Disable Commands Enables or disables The OS to skip BIOS PPI user prompts when issuing TPM PPI
Disable and Deactivate commands.
Default: OFF
PPI Bypass for Clear Commands Enables or disables the operating system to skip BIOS Physical Presence Interface
(PPI) user prompts when issuing the Clear command.
Default: OFF
Attestation Enable Enables to control whether the TPM Endorsement Hierarchy is available to the OS.
Disabling this setting restricts the ability to use the TPM for signature operations.
Default: ON
Key Storage Enable Enables to control whether the TPM Endorsement Hierarchy is available to the OS.
Disabling this setting restricts the ability to use the TPM for storing owner data.
Default: ON
SHA-256 Enables or disables the BIOS and the TPM to use the SHA-256 hash algorithm to
extend measurements into the TPM PCRs during BIOS boot.
Default: ON
Clear Enables or disables the computer to clear the PTT owner information, and returns
the PTT to the default state.
Default: OFF
TPM State Enables or disables the TPM. This is the normal operating state for the TPM when
you want to use its complete array of capabilities.
Default: Enabled
82 System setup