Dell EqualLogic PS4100E, Руководство по настройке

Страница: 13 / 152

March 2013 Dell EqualLogic Configuration Guide v14.1 1-4
Table 3 Supported configuration limits
Configuration
PS4000/PS4100 and
PS-M4110 groups only
a
All other groups
b
Volumes and replica sets per group 512
h
1024
Volume size
c
15 TB 15 TB
Volumes enabled for replication (outbound)
d
32 256
Snapshots and replicas per group 2048 10,000
Snapshots per volume 128 512
Replicas per volume 128 512
Volumes that have Synchronous Replication
Enabled
4 32
Schedules (snapshot or replication) per volume
or volume collection
16 16
Persistent Reservation registrants per volume 96 96
Replication partners per group 16 16
Replication partners per volume 1 1
Members per group 2 16
a
Members per pool 2 8
Pools per group 2 4
Volumes per collection 8 8
Collections per group (snapshot and replication) 100 100
Volume connections (each time an iSCSI
initiator connects to a volume counts as a
connection)
e,f
512 per pool
g
1024 per group with
2 pools
1024 per pool
h
4096 per group with
4 pools
Access control records per volume and its
snapshots
16 16
Simultaneous management sessions (any
combination of GUI, telnet, or scripting sessions)
7 7
Thin provisioning
i
limits
(minimum allocation)
10% of volume size 10% of volume size
Administrator accounts per group 100 100
(a)
A group can contain a maximum of two PS4000, PS4100, and/or PS-M4110 arrays.
(b) Includes groups of mixed array types and all other group types except groups containing only PS40x0, PS41x0, and
PS-M4110 arrays. When a group contains a mix of PS40x0, PS41x0, and PS-M4110 arrays and other array models,
the higher limits prevail.
(c) Practical maximum volume size is operating system-specific. A PS Series group can create and present volumes up
to 15 TB.
(d) Up to 16 simultaneous replication operations can take place.
(e) To avoid service outages or possible loss of connectivity during failovers, Dell recommends increasing initiator
timeouts for groups with more than 512 connections. See the iSCSI Initiator and Operating Systems Considerations
document for more information.
(f)
Inbound replication connections count towards the total number of connections.
(g) With firmware version 5.1, maximum number of volumes per group and maximum number of connections per pool
increased from 256 to 512
(h)
Up to 1024 connections per pool are supported for all groups except groups containing only PS40x0, PS41x0, and
PS-M4110 arrays. This provides increased scalability in virtualized environments. These connections may be
distributed across a maximum of 512 volumes.
(i)
Volumes automatically created and managed by the NAS Service inside the NAS Reserve pool used by an FS Series
appliance are fully allocated at creation and cannot be thin provisioned. Once those volumes are created (when
the NAS Reserve is created they cannot be shrunk.