Dell EMC VxFlex Ready Node R840, Руководство пользователя

Страница: 127 / 218

Check
List Task Topic
☐
3 Remove the bezel. See Remove the front bezel on page
166.
☐
4 Disconnect the power cords and I/O
cables. See Disconnect the power cords and I/O
cables on page 164.
☐
5 Extend the system from the cabinet. See Extend the system from the cabinet
on page 164.
☐
6 Remove the system cover. See Remove the system cover on page
173.
☐ 7 Remove the processor and heat sink
module. See Remove the processor and heat sink
module on page 127.
☐ 8 Remove the processor from the
processor and heat sink module. See Removing the processor from the
processor and heat sink module on page
129.
☐ 9 Install the processor into the processor
and heat sink module. See Installing the processor into a
processor and heat sink module on page
130.
☐ 10 Install the processor into the processor
and heat sink module. See Install the processor and heat sink
module on page 134.
☐
11 Install the system cover. See Install the system cover on page
173.
☐
12 Slide the system into the cabinet. See Slide the system into the cabinet on
page 165.
☐
13 Connect the cable cords. See Connect the I/O cables and power
cords on page 164.
☐
14 Install the front bezel. See Install the front bezel on page 166.
Perform mandatory software tasks to return the node to operation:
☐ 15 Return the node to operation. See "Return the node to operation" in
the VxFlex Ready Node Field Replacement
Unit Software Guide
.
Remove the processor and heat sink module
Before you begin
WARNING
The heat sink may be hot to touch for some time after the system is powered
down. Allow the heat sink to cool before removing it.
CAUTION
To prevent damage to the processor socket when replacing a faulty system
board, ensure that you cover the processor socket with the processor dust cover.
Hardware FRU procedures
Remove the processor and heat sink module 127