Dell EMC VxFlex Ready Node R840, Руководство пользователя

Страница: 116 / 218

Replacing an M.2 SSD module
The system's BOSS card contains two M.2 SSD modules. To replace an M.2 SSD
module, perform the tasks in the following checklist, in the order they are listed. The
tasks are used for all OS types.
Note
Before starting this FRU procedure, familiarize yourself with the topics in Important
information before performing a FRU procedure on page 56.
CAUTION
This FRU procedure requires you to perform mandatory software tasks in VxFlex
OS, as described in the
VxFlex Ready Node Field Replacement Unit Software Guide .
You will be referred to these mandatory software tasks in the following checklist.
Check
List Task Topic
☐ 1 Identify the faulty part. See System diagnostics and indicator
codes on page 203.
Perform mandatory software tasks to prepare the node for part replacement:
☐ 2 Gracefully shut down the node. See "Gracefully shut down the node" in
the VxFlex Ready Node Field Replacement
Unit Software Guide
.
Return to this guide for instructions on replacing the system component:
☐
3 Remove the bezel. See Remove the front bezel on page
166.
☐
4 Disconnect the power cords and I/O
cables. See Disconnect the power cords and I/O
cables on page 164.
☐
5 Extend the system from the cabinet. See Extend the system from the cabinet
on page 164.
☐
6 Remove the system cover. See Remove the system cover on page
173.
☐ 7 Remove the BOSS card. See Remove the BOSS card from
expansion card riser 1 on page 60.
☐ 8 Remove the faulty M.2 module. See Remove the M.2 SSD module on
page 117.
☐ 9 Install the replacement M.2 module. See Install the M.2 SSD module on page
117.
☐ 10 Install the BOSS card. See Install the BOSS card onto expansion
card riser 1 on page 63.
☐
11 Install the system cover. See Install the system cover on page
173.
☐
12 Slide the system into the cabinet. See Slide the system into the cabinet on
page 165.
Hardware FRU procedures
116 VxFlex Ready Node R840 Hardware Field Replacement Unit and Service Manual