Dell EMC VxFlex Appliance R840 страница 34 Скачать руководство пользователя | Manualshive

Страница: 34 / 44

background image

Table 25 iDRAC Quick Sync 2 indicators and descriptions (continued)

iDRAC Quick Sync 2 indicator
code

Condition

Corrective action

Solid amber

Indicates that the system is in fail-safe
mode.

Restart the system. If the problem persists, see

.

Blinking amber

Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.

Restart the system. If the problem persists, see

.

iDRAC Direct LED indicator codes

The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC
subsystem.

You can configure iDRAC Direct by using a USB-to-micro USB (type AB) cable, which you can connect to your laptop
or tablet. The following table describes iDRAC Direct activity when the iDRAC Direct port is active:

Note:

The internal USB is not supported on VxFlex appliance R840.

Table 26 iDRAC Direct LED indicator codes

iDRAC Direct LED
indicator code

Condition

Solid green for two
seconds

Indicates that the laptop or tablet is connected.

Flashing green (on for two
seconds and off for two
seconds)

Indicates that the laptop or tablet connected is recognized.

Turns off

Indicates that the laptop or tablet is unplugged.

NIC indicator codes

Each NIC on the back of the system has indicators that provide information about the activity and link status. The
activity LED indicator indicates if data is flowing through the NIC, and the link LED indicator indicates the speed of the
connected network.

Figure 7 NIC indicator codes

1.

Link LED indicator

2.

Activity LED indicator

The NIC indicators table describes different NIC indicator codes and condition of the connectivity.

System diagnostics and indicator codes

34

R840xd Owner's Guide

«
...
32
33
34
35
36
...
»

Содержание EMC VxFlex Appliance R840













































Отзывы:

Нет отзывов

Похожие инструкции для EMC VxFlex Appliance R840

Бренд: Gateway Страницы: 138

Link Manager 4010-43

Бренд: Point Six Страницы: 131

Бренд: Cobalt Digital Inc Страницы: 218

Flex System x240 Compute Node

Бренд: IBM Страницы: 28

Бренд: Oki Страницы: 2

NOP1840 PEP-Box

Бренд: Newtec Страницы: 96

Digital Audio Server

Бренд: CAAS Audio Страницы: 23

Бренд: IBM Страницы: 66

SuperServer 1029U-T Series

Бренд: Supermicro Страницы: 1

ProLiant ML110 Gen 10

Бренд: HPE Страницы: 5

@server xSeries 343

Бренд: IBM Страницы: 193

Sun Fire Netra 1280

Бренд: Sun Microsystems Страницы: 10

Бренд: MO-SYS Страницы: 26

Бренд: Auspex Systems Страницы: 52

Бренд: Sony Страницы: 3

Бренд: Sony Страницы: 7

Бренд: Sony Страницы: 26

Бренд: Sony Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды