manualshive.com logo in svg

Dell EMC VMAX 250F, Руководство по планировке объекта, Страница: 109 / 132

Поделиться
Скачать
Dell EMC VMAX 250F Скачать руководство пользователя страница 109

Table 36 Bottom routing model, VMAX 250F

Model

Description

ES-BOT-KIT

Bottom routing kit

VMAX 450F, VMAX 850F, VMAX 950F
The EMC GridRunner

™

 bottom routing kit (E-BOT-KIT) and customer-supplied cable

troughs can help organize and protect subfloor cables that connect separated bays.
GridRunners reduce the vertical drop of the dispersion cables, which may increase the
distance between the separated bays.

Each GridRunner supports the cable bundle above the subfloor. GridRunners are
installed with brackets that attach to the stanchions under the raised floor. The
stanchions are up to one inch in diameter, measured at six inches (15.24 cm) below
the raised tiles.

To ensure sufficient support of the cable bundle, a GridRunner should be installed
every two meters.

Table 37 Bottom routing model, VMAX 450F, VMAX 850F, VMAX 950F

Model

Description

E-BOT-KIT 

a

Bottom routing kit

a. GridRunner basket for supporting cables beneath the floor for dispersed bays.

Optional kits

GridRunner kit and customer-supplied cable trough

     

109

Содержание EMC VMAX 250F





































































































































Отзывы:

Нет отзывов