Figure 96. Removing optical drive
Next steps
Install an optical drive.
Related links
Installing the optical drive
Prerequisites
Follow the safety guidelines listed in
Steps
1
Align the optical drive with the optical drive slot on the front of the system.
2
Slide in the optical drive until the release tab snaps into place.
Figure 97. Installing the optical drive
Next steps
1
Connect the power and data cables to the connector on the optical drive and the connector on the system board.
NOTE:
Route the cable properly on the side of the system to prevent it from being pinched or crimped.
Dell EMC PowerEdge R640 Installation and Service Manual
Installing and removing system components
141