Replacing the mobile-
broadband card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance
.
Procedure
CAUTION: To avoid damage to the mobile-broadband card, do not
place any cables under it.
1
Align the notch on the mobile-broadband card with the tab on the
mobile broadband slot.
2
Insert the mobile-broadband card into the mobile broadband card.
3
Connect the antenna cables to the mobile-broadband card.
The following table provides the antenna-cable color scheme for the
wireless card supported by your computer.
Connectors on the mobile-
broadband card
Antenna-cable color
Main (white triangle)
white
Auxiliary (black triangle)
black
4
Place the mobile-broadband card bracket on the system board.
5
Replace the screws that secures the mobile-broadband card and bracket
to the system board.
Post-requisites
Replace the
top cover
.
24
Содержание Edge 5100 Series
