Dell Edge 3001, Инструкция по установке и эксплуатации, Страница: 51 / 70

5 5
Setting up the operating system
WARNING: To prevent operating system corruption from sudden power loss, use the operating system to gracefully shut
down the Edge Gateway.
The Edge Gateway is shipped with one of the following operating systems:
• Windows 10 IoT Enterprise LTSB 2016
• Ubuntu Core 16
NOTE: For more information about Windows 10 operating system, see https://support.microsoft.com/en-us .
NOTE: For more information about the Ubuntu Core 16 operating system, see www.ubuntu.com/desktop/snappy .
Windows 10 IoT Enterprise LTSB 2016
Overview
The Edge Gateway is shipped with Windows 10 IoT Enterprise LTSB 2016. For more information about Windows 10 operating system,
see
https://support.microsoft.com/en-us .
Boot up and login—Remote system configuration
NOTE: The Edge Gateway 3003 can also be configured remotely.
1. Connect a network cable from the Ethernet port one on the Edge Gateway to a DHCP-enabled network or router that provides
IP addresses.
NOTE: The first-time boot to Windows takes about five minutes for system configuration. Subsequent boots take
approximately 50 seconds.
2. Using the MAC address, obtain the IP address through your network’s DHCP server or through a network analyzer.
3. On the Windows computer, search for Remote Desktop Connection and launch the application.
4. Log in using the IP address or with the following details:
• Computer name:
'6HUYLFH7DJ!
• User name:
DGPLQ
• Password:
DGPLQ
NOTE: Your computer must be on the same subnet as the Edge Gateway.
NOTE: Ignore any certification errors when connecting to your Edge Gateway.
51