Vertical
Position
- and + buttons move OSD down and up.
OSD Hold
Time
The OSD stays active for as long as it is in use.
'OSD Hold Time': Sets the length of time the OSD will remain active after the last time you pressed a button.
Use the - and + buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.
NOTE:
Default 'OSD hold time' is 20 seconds.
OSD Lock
'OSD Lock': Controls user access to adjustments. When 'Yes' (+) is selected, no user adjustments are allowed. All buttons are locked
except the menu button.
All buttons can be locked or unlocked when the 'Menu' button is pushed and held for over 15 seconds.
NOTE:
When the OSD is locked, pressing the'
Menu
button will take the user directly to the 'OSD settings' menu, with 'OSD Lock'
preselected on entry. Select 'No'(-) to unlock and allow user access to all applicable settings.
Language
Language sets the OSD to display in one of the five languages (English, Español, Français, Deutsch, Japanese).
NOTE:
The language chosen affects only the language of the OSD. It has no effect on any software running on the computer.
Factory
Reset
Factory Reset
returns the settings to the factory preset values for the selected group of functions.
Exit
is used to exit out of
Factory Reset
menu.
For
All settings
, all user adjustable settings are reset at one time except language settings.
IR
-
This feature will help reduce minor cases of image retention.
Enable LCD Conditioning:
If an image appears to be stuck on the monitor, select
LCD Conditioning
to help eliminate any image
Downloaded from ManualMonitor.com Manuals
