Dell E18S Series Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 137

background image

2

Using The System Setup And Boot Manager

System Setup enables you to manage your system hardware and specify BIOS-level options.
The following keystrokes provide access to system features during startup:

Keystroke Description

<F2>

Enters the System Setup.

<F10>

Enters System Services, which opens the Dell Lifecycle Controller 2 (LC2). The Dell LC2 supports systems
management features such as operating system deployment, hardware diagnostics, platform updates, and
platform configuration, using a graphical user interface. The exact LC2 feature set is determined by the
iDRAC license purchased. For more information, see the Dell LC2 documentation.

<F11>

Enters the BIOS Boot Manager or the Unified Extensible Firmware Interface (UEFI) Boot Manager,
depending on the system's boot configuration.

<F12>

Starts Preboot eXecution Environment (PXE) boot.

From the System Setup, you can:

•

Change the NVRAM settings after you add or remove hardware

•

View the system hardware configuration

•

Enable or disable integrated devices

•

Set performance and power management thresholds

•

Manage system security

You can access the System Setup using the:

•

Standard graphical browser, which is enabled by default

•

Text browser, which is enabled using Console Redirection

To enable Console Redirection, in System Setup, select System BIOS

→

Serial Communication screen

→

Serial

Communication, select On with Console Redirection.

NOTE: By default, help text for the selected field is displayed in the graphical browser. To view the help text in the
text browser, press <F1>.

Choosing The System Boot Mode

System Setup enables you to specify the boot mode for installing your operating system:

•

BIOS boot mode (the default) is the standard BIOS-level boot interface.

•

UEFI boot mode is an enhanced 64-bit boot interface based on Unified Extensible Firmware Interface (UEFI)

specifications that overlays the system BIOS.

You must select the boot mode in the Boot Mode field of the Boot Settings screen of System Setup. Once you specify the
boot mode, the system boots in the specified boot mode and you then proceed to install your operating system from that

21

«
...
19
20
21
22
23
...
»

Содержание E18S Series










































































































































Отзывы:

Нет отзывов

Похожие инструкции для E18S Series

Бренд: Raven Страницы: 18

Бренд: Raven Страницы: 232

Бренд: Seneca Страницы: 8

Бренд: Jason.L Страницы: 6

Бренд: Gigabyte Страницы: 34

Бренд: IBASE Technology Страницы: 58

Бренд: Vivo Страницы: 8

Бренд: Lenovo Страницы: 51

Бренд: Lenovo Страницы: 61

Бренд: Lenovo Страницы: 59

Бренд: Lenovo Страницы: 53

Бренд: Lenovo Страницы: 83

Бренд: Lenovo Страницы: 59

Бренд: Lenovo Страницы: 52

Бренд: Lenovo Страницы: 61

Бренд: Lenovo Страницы: 73

Бренд: Lenovo Страницы: 35

10089/1168/4744

Бренд: Lenovo Страницы: 57

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды