background image

 

 

 

LCD Monitor Quality & Pixel Policy  

During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that 
appears as an extremely tiny dark or bright discolored spot.When the pixel remains permanently lit, it is known as a 

bright dot.

 When the pixel remains black, it is 

known as a 

dark dot.

 

In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normal and 

within competitive standards.  For more information, see Dell Support site at: support.dell.com.

 

Maintenance Guidelines  

Caring for your Monitor 

For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor: 

l

To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the 
antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.  

l

Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.  

 

l

If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.  

l

Handle your monitor with care as a darker

-colored monitor may scratch and show white scuff marks more than a lighter-

colored monitor.  

 

l

To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.  

  

 

Back to Contents Page

 

l

Operating  

l

Non-operating  

0° to 40°C (32° to 104°F) 

 

Storage: -

20° to 60°C (

-

4° to 140°F)

 

Shipping: -

20° to 60°C(

-

4° to 140°F)

Humidity

l

Operating  

l

Non-operating  

  

 

10% to 80% (non-condensing)  

Storage: 5% to 90% (non-condensing) 
Shipping: 5% to 90%(non-condensing) 

Altitude

l

Operating  

l

Non-operating  

 

 

3,657.6m (12,000 ft) max 

12,192m (40,000 ft) max 

Thermal dissipation

256.08 BTU/hour (maximum) 
119.5 BTU/hour (typical)

 

CAUTION:

 Read and follow the 

safety instructions

 before cleaning the monitor. 

 

 

CAUTION:

 Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. 

 

Содержание E1709W




























Отзывы: