Figure 58. Installing the expansion card riser 3
1.
riser guide-front
2. power connector (for GPU cards)
3. expansion card riser 3
4. riser guide-back
5. expansion card riser 3 connector
Next steps
1.
Install the expansion card(s) into the expansion card risers 2 or 3.
2.
Follow the procedure listed in the After working inside your system section.
3.
Install any device drivers required for the card as described in the documentation for the card.
Related Links
Safety instructions
After working inside your system
Before working inside your system
Internal dual SD module (optional)
The Internal Dual SD Module (IDSDM) card provides two SD card slots. This card offers the following
features:
• Dual card operation — maintains a mirrored configuration by using SD cards in both the slots and
provides redundancy.
NOTE: When the
Redundancy
option is set to
Mirror Mode
in the
Integrated Devices
screen of
System Setup, the information is replicated from one SD card to another.
• Single card operation — single card operation is supported, but without redundancy.
121
