background image

Notes, Notices, and Cautions

 

NOTE: 

A NOTE indicates important information that helps you make better use of your computer.

 

NOTICE: 

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the 

problem.

 

CAUTION: 

A CAUTION indicates a potential for property damage, personal injury, or death.

If you purchased a Dell™ n Series computer, any references in this document to Microsoft

® 

Windows

®

 

operating systems are not applicable.

____________________

Information in this document is subject to change without notice.
© 2004–2005 Dell Inc. All rights reserved.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, InspironDell PrecisionDimensionOptiPlexLatitude, PowerEdge, PowerVault, PowerApp, 
DellNet
, and PowerConnect are trademarks of Dell Inc.; Intel and Pentium are registered trademarks of Intel Corporation; Microsoft, Windows, 
and Outlook are registered trademarks of Microsoft Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. 
Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model DCSM

January 2005

P/N C7565

Rev. A01

C7565bk1.book  Page 2  Wednesday, January 26, 2005  1:37 PM

Содержание Dimension C7565













































































































































Отзывы: